![background image](http://html.mh-extra.com/html/makita/maktec-mt362/maktec-mt362_technical-information_1722858003.webp)
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature (cont.)
DISASSEMBLING
(2) Disassemble Armature from Motor section. (
Fig. 3
)
Fig. 3
1. Remove Brush holder caps
and Carbon brushes.
Brush holder caps
2. Separate Motor bracket by unscrewing
four M5x45 Pan head screws.
3. Remove Collet nut and
Collet cone from Armature.
Motor bracket
M5x45 Pan head screw
(4 pcs.)
Collet nut
Collet cone
Armature
4. Remove Armature from Motor bracket by tapping
the drive end of Armature with plastic hammer,
or by pressing the same portion of Armature with
Arbor press.
Note
: Ball bearing 6004ZZ on Armature’s drive end
remains in Motor bracket in this step.
5. Remove Ball bearing 629ZZ with 1R269,
and then remove Insulation washer.
Ball bearing 629ZZ
Insulation washer
Carbon brushes
P
3
/
9