background image

16

ENGLISH

2.

 

Place the dust cup set with the spacer onto the 

barrel neck of the gear housing aligning the 

 symbol 

on the dust cup set with one of the grooves in the barrel. 
Then hold the attachment unit of the dust cup set and 
push it down onto the barrel to secure it in place.

1

2

3

4

5

Fig.26

►    

1.

 Dust cup set 

2.

 Attachment unit 

3.

 Spacer 

4.

 

 symbol 

5.

 Groove

For model HR009G

Place the dust cup set onto the barrel neck of the gear 
housing aligning the 

 symbol on the dust cup set with 

one of the grooves in the barrel. Then hold the attach-
ment unit of the dust cup set and push it down onto the 
barrel to secure it in place.

1

2

3

4

Fig.27

►    

1.

 Dust cup set 

2.

 Attachment unit 

3.

 

 symbol 

4.

 Groove

NOTE:

 If you connect a vacuum cleaner to the dust 

cup set, remove the dust cap before connecting it.

1

Fig.28

►    

1.

 Dust cap

Uninstallation

1.

 

Push the chuck cover down all the way and pull a 

bit off.

1

2

Fig.29

►    

1.

 Bit 

2.

 Chuck cover

2.

 

Hold the attachment unit of the dust cup set and 

pull it apart from the tool.

1

Fig.30

►    

1.

 Attachment unit

NOTE:

 If the cap comes off from the dust cup set, 

place it back to the original position.

Summary of Contents for HR009GZ01

































Reviews: