18
ENGLISH
1
3
2
4
5
6
Fig.35
►
1.
Hooks
2.
Dust collection system
3.
Pockets
4.
Nozzle
5.
Air duct
6.
Suction air outlet
Uninstallation
Press and hold the lock off button on the dust collection
system, and lower the nozzle to release the upper part
of the dust collection system. Unhook the lower part of
the dust collection system from the tool.
1
2
3
Fig.36
►
1.
Dust collection system
2.
Nozzle
3.
Lock off
button
Adjusting nozzle position
CAUTION:
Do not point the nozzle at yourself
or others when releasing the nozzle by pushing
the guide adjustment button.
Slide in and out the nozzle guide while pressing the
guide adjustment button, and then release the button
at an exact position where the tip of the drill bit sits just
behind the front surface of the nozzle.
1
2
3
4
Fig.37
►
1.
Nozzle guide
2.
Guide adjustment button
3.
Tip of
drill bit
4.
Front surface of nozzle
Adjusting drilling depths
Drilling depths can be adjusted by changing the lengths
between the depth adjustment button and the support
arm for nozzle guide. Press and hold the depth adjust
-
ment button and slide it to your desired position.
4
3
1
2
Fig.38
►
1.
Depth adjustment button
2.
Nozzle guide
3.
Support arm for nozzle guide
4.
Drilling depths
Beating dust on the filter
CAUTION:
Do not turn the dial on the dust
case while the dust case is removed from the
dust collection system.
Doing so may cause dust
inhalation.
CAUTION:
Always switch off the tool when
turning the dial on the dust case.
Turning the dial
while the tool is running may result in the loss of
control of the tool.
