background image

12

ENGLISH

Air duct

CAUTION:

 

Do not put your finger into the air 

duct or do not insert any other object into the air 
duct.

 Otherwise you may get injured or the tool may 

get damaged.

The air duct is designed to improve the suction perfor-
mance of the dust collection system. For details on how 
to install the dust collection system, refer to the instruc-
tions on installing the dust collection system.

1

Fig.12

►    

1.

 Air duct

Hook

Optional accessory

CAUTION:

 

Always remove the battery when 

hanging the tool with the hook.

CAUTION:

 

Never hook the tool at high loca-

tion or on potentially unstable surface.

The hook is convenient for temporarily hanging the tool.

Before installing the hook, remove the rubber cap from 
the screw holes in the mounting bracket. Insert the plate 
washers under the bracket, and then tighten the hook 
with screws in place.

1

2

3

5

4

Fig.13

►    

1.

 Rubber cap 

2.

 Mounting bracket 

3.

 Plate washers 

4.

 Hook 

5.

 Screws

For use, lift up the arm of the hook until it snaps into the 
open position.
When not in use, be sure that the hook is folded back in 
the closed position.

1

2

3

Fig.14

►    

1.

 Hook 

2.

 Open position 

3.

 Closed position

Fig.15

Connecting lanyard (tether strap) to 
the hook

CAUTION:

 

Do not use damaged hook and 

screws. Before use, always check for damages, 
cracks or deformations, and make sure that the 
screws are tightened.

CAUTION:

 

Make sure that the hook is 

securely installed with the screws.

CAUTION:

 

Do not install or remove any 

accessory while hanging the tool.

 The tool may fall 

if the screws are not tightened.

CAUTION:

 

Always use a locking carabiner 

(multi-action and screw gate type) and be sure 
to attach the lanyard (tether strap) to the double 
looped portion of the hook.

 Improper attachment 

may cause tool drop from the hook and result in 

personal injury.

Summary of Contents for HR009GZ01

































Reviews: