![background image](http://html.mh-extra.com/html/makita/gas-nailer-gn900se/gas-nailer-gn900se_technical-information_228769013.webp)
P 13/ 16
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-5. DC motor and Spark plug (cont.)
ASSEMBLING
Flat washer 10
Retaining
ring R-24
Pass Motor’s Lead wires through Conical compression
spring 12-18, Flat washer 10 and Retaining ring R-24.
And assemble Epoxy washer 2 to Motor shaft.
After putting grease to Steel ball 3, assemble Steel
ball 3 to DC Motor.
Facing the Steel ball to the slit of Motor sleeve,
insert the DC motor into Motor sleeve.
Put the another Conical compression spring 12-18
into Motor box as illustrated above.
Assemble DC motor covered with Motor sleeve while
paying attention to the descriptions in
Fig. 27A
Conical compression
spring 12-18
DC. motor
(1) Assemble DC Motor to Cylinder head as illustrated in
Figs. 26,
27 and 27A
.
Top view of Cylinder head and DC motor
Epoxy
washer 2
Protrusion of
Motor sleeve
Steel ball 3
Groove of
Motor box
Fitting the Protrusion of Motor sleeve to either of the grooves of Motor box,
assemble DC motor to Cylinder head.
Motor box of Cylinder head
Steel ball 3
Motor sleeve
Slit
Fig. 26
Fig. 27
Fig. 27A
Conical compression spring 12-18
Motor box