P 9/ 16
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Pusher, Handle section
DISASSEMBLING
M5x10 Hex socket head bolt
Fig. 17
Fig. 18
Note: Lock bar and Compression spring 4 easily fall off in this step.
Pay attention not to lose Lock bar and compression spring 4.
2. And then remove the following screws.
* M5x10 Hex socket head bolt
* 5x25 Tapping screw (3pcs.)
Handle set (L) and Nail feeding section
can be separated from Handle set (R).
Sliding Pusher lever toward the rear side,
insert Screwdriver to stop Pusher lever’s return.
Remove Lock bar and compression spring 4.
Lock Bar
Pusher lever
Compression spring 4
(1) Separate Handle set from Housing as illustrated in Fig. 2.
(2) Handle set (L) can be separated from Handle set (R) as illustrated in Fig. 17. And remove Lock bar
and Compression spring 4 as illustrated in Fig. 18.
Magazine support
Handle set (R)
Nail rail
Nail feeding section
Handle set (L)
5x25 Tapping
screw (3pcs.)
Magazine
support
1. Pressing the end of Handle set,
remove Magazine support by
sliding it toward rear side.
Handle set (L)