2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
GAG14
Applicable grinding wheel
Max. wheel diameter
150 mm (6″) *
Max. wheel thickness
6.4 mm (1/4″)
Applicable cut-off wheel
Max. wheel diameter
150 mm (6″) *
Max. wheel thickness
3.0 mm (1/8″)
Applicable wire wheel brush
Max. wheel diameter
125 mm (5″) *
Max. wheel thickness
20 mm (13/16″)
Spindle thread
5/8″
Max. spindle length
23 mm (29/32″)
No load speed (n
0
) / Rated speed (n)
9,000 /min
Overall length (with BL4040)
410 mm (16-1/8″)
Net weight
3.1 - 4.7 kg (6.8 - 10.4 lbs)
Rated voltage
D.C. 36 V - 40 V max
* If you install optional wheel guard indicated as 4-1/2″ or 5″ on the tool, 115 mm (4-1/2″) and 125 mm (5″) wheels
can be used.
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
PDC01 / PDC1200
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
