ASSEMBLING
(32)
1. Assemble Motor and Motor holder (32)
so that Flat surface comes to Red mark side.
Flat surface
1
-
11
Red mark
1
-
12
2. Insert Motor into Ball screw ass’y (26).
Red mark
Flexible board
(26)
3. Tighten two C.H.screw M3x10 (27).
(27)
There is one more
on the other side.
1
-
13
(35)
Red mark
Storage space
of Earth terminal
6. Set Motor ass’y so as Red mark
to face the storage space of Earth terminal.
5. Fit the groove of Ball screw ass’y to the rib
of Lower housing (35).
4. Set Motor ass’y in Lower housing (35).
1
-
14
(34)
7. Put Sub controller (34) inside
the rib of Lower housing (35).
1
-
15
Choke coil
8. Put Choke coil under Motor.
(35)
rib
(35)
P 7/
29