![background image](http://html1.mh-extra.com/html/makita/dup361/dup361_technical-information_4006711011.webp)
(13)
2
-
14
3. Set Ball nut cover B (13).
(12)
4.
T Pan head tapping screws 2x10 (12).
2
-
15
5. Assemble the parts as drawn.
Internal gear 48 (28)
Spur gear 18 (29)
Flat washer 12 (30)
2
-
16
Red mark
Flexible board
6. Insert Motor in Ball screw ass’y.
Note:
You do not need to care about the
position of Red mark and Flat surface.
Flat face
2
-
17
(27)
There is one more
on the other side.
7. Tighten C.H.screws M3x10 (27).
2
-
18
(25)
(23)
(21)
8. Insert Magnet (21), Compression
spring (23) to Ball nut cover A (25).
2
-
19
(15)
9. Assemble Link arm (15) while facing concave
portion outside and close to the pin of
Ball screw ass’y (26).
Note:
Same on the other side
Concave portion
Pin of Ball screw
ass’y (26)
P 11/
29