![background image](http://html1.mh-extra.com/html/makita/dup361/dup361_technical-information_4006711012.webp)
2
-
20
(21)
10. Set Trigger to one pin of
Ball screw ass’y (26).
Trigger
(15)
Hold
11.
Put Trigger on Link arm (15) while
expanding the Trigger and holding
Magnet (21) with Trigger.
Slotted screwdriver
12.
Put Trigger on the pin of Link arm (15)
while expanding the Trigger with
Slotted screwdriver.
2
-
21
13. Insert Board to
Ball nut cover A (25).
(25)
Board
(58)
14. T Pan head tapping
screw 2x10 (58).
2
-
22
(25)
(13)
15.
Set Flexible board inside of the
ribs of Ball nut cover A (25)
and Ball nut cover B (13).
2
-
23
16. Set Red mark of Motor and
Flat face of Bearing box
complete in a line.
Note
: Put Washing agent for
cleaning oils from metals on
a waste cloth and remove fat
from the flat surface.
Do not put Washing agent
directly on the flat surface
of Bearing box because it
damages parts.
Flat face
White line
Bearing box complete
Red mark
17.
Apply Flexible board in this range and make sure that the White line
of flexible board matches the edge of Bearing box complete.
Note
:
・
Do not apply additional Double-faced tape on Flexible board because
it reduces the gap between Bearing box complete and Housing,
which may lead to the breaking.
・
Adhesive of the back side of Flexible board can be reused.
・
Make sure to apply Flexible board straight.
・
Make sure to apply Flexible board securely. If not, it may lead to
the breaking.
P 12/
29