21 ENGLISH
9.
Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation
requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on
packaging and labeling must be observed. For
preparation of the item being shipped, consulting
an expert for hazardous material is required.
Please also observe possibly more detailed
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11.
Follow your local regulations relating to
disposal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing
fires,
personal
injury
and
damage. It
will
also
void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery
cartridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room
tem
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
national regulations.
4.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
►
Fig.2
1
Lock-off button
2
Switch trigger
3
Handle
4
Blade case
5
Blade
6
Blade guard
7
Sub-fence
8
Small sub-fence
9
Base
10
Turn base
11
Guide fence
12
Vertical vice
13
Dust bag
14
Dust nozzle
15
Center cover
-
-
►
Fig.3
16
Lamp
17
Battery cartridge
18
Hex wrench
19
Release lever
20
Lever (for bevel angle
adjustment)
21
Kerf board
22
Lower
limit
adjusting
bolt
23
Lamp switch
24
Laser switch
-
-
-
-
-
-
INSTALLATION
Bench mounting
WARNING:
Ensure that the tool does not
move on the supporting surface.
Movement of the
miter saw on the supporting surface while cutting may
result
in
loss
of
control
and
serious
personal
injury.
1.
Fix the base to a level and stable surface,
screwing with two bolts. This helps to prevent from
tipping and possible
injury. ►
Fig.4:
1.
Bolt
Summary of Contents for DLS600
