R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -9 Adjustment of Bevel angle of Base to Saw blade
P 13/ 18
Fig. 18
Fig. 19
Caution
:
It is necessary to attach saw blade
to adjust the angle of Saw blade to Base.
Therefore,
DO NOT ATTACH BATTERY to avoid unexpected start of the machine
.
(1) Set the cutting depth of the machine to maximum with the bevel angle adjusted to 90°, then attach Saw blade.
(2) Adjust Bevel angle of Base to Saw Blade (90°) as drawn in
Fig. 18
.
(3) Adjust Bevel angle of Base to Saw Blade (45°) as drawn in
Fig. 19
.
M4x6
Hex socket
head screw
90°
1R208
1R207
Stopper
Blade case
complete
1. Turn Stopper in a direction designated
with the arrow until it touches Blade case.
Pointer on
Angular guide
45°
1. Open Safety cover fully, then apply 1R208 to
the base metal of the saw blade as drawn below.
Then, adjust for 90° accuracy by turning
M5x8 Hex socket set screw with Hex wrench 2.5.
“ 0° mark ” of
Bevel guide
2. Adjust the position of Bevel guide while aligning
its “ 0° mark ” to the pointer on Angular guide.
And then, tighten Bevel guide with two M4x6
Hex socket head screws.
Hex wrench 2.5
M5x8 Hex socket head set screw
Hex wrench 2.5
2. Open Safety cover fully, then apply 1R207 to
the base metal of the saw blade as drawn below.
Then, adjust for 45° accuracy by turning
M5x8 Hex socket set screw with Hex wrench 2.5.
M5x8
Hex socket
head screw
