P 3/ 18
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
(1) Set the cutting depth of the machine to maximum, and remove saw blade as drawn in
Fig. 2
.
(2) disassemble Base section as drawn in
Fig. 3
.
1. Locking Spindle with Shaft lock lever,
remove Hex flange head bolt and
Outer flange.
2. Opening Safety cover fully, remove Saw blade.
and Inner flange.
Hex flange
head bolt
Outer flange
Safety cover
1. Remove Retaining ring S-34 with 1R003, then remove
Rubber sleeve 6 and M6x20 Pan head screw.
And then, disassemble Safety cover by releasing linkage
of Torsion spring 4 from Safety cover.
2. Remove M5x8 Hex socket head set screw.
Then, remove 6-7 Shoulder pin and Flat
washer 7 from Base to free Depth guide
from Base.
3. Remove M5 +Truss head screw while locking M5x8 Hex lock nut with Wrench 8.
And then, remove Stopper and O ring 9 from Base section.
Inner flange
Saw blade
M5x8 Hex socket
head set screw
Flat washer 7
6-7 Shoulder pin
Depth guide
Wrench 8
Stopper
M5-8 Hex lock nut
M5 +Truss
head screw
M5-8 Hex
lock nut
M5 + Truss
head screw
Fig. 2
Fig. 3
Retaining ring S-34
Safety cover
Rubber sleeve 6
O ring 9
