R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Depth guide (cont.)
DISASSEMBLING
(2) Disassemble Depth guide section as drawn in
Fig. 9
.
E-8 Bow stop ring
E-8 Bow stop ring
Slotted screwdriver
1. Loosen M6 Hex nut
with Lever 45.
Lever 45
Flat washer 6
M6 Hex nut
M6 Hex nut
Lever 45
2. Remove Stop ring E-8 with a slotted
screwdriver by turning the driver.
3. Remove M6 Hex nut, Lever 45
and Flat washer 6 from M6x90
Cap square neck bolt.
5. Pull off M6x90 Cap square neck bolt
from Pipe 6 on the machine.
6. Pull off Pipe 6 from the machine.
Note
: Be careful not to lose two Flat washers 6
mounted on both sides of Depth guide.
7. Remove Depth guide from the machine.
M6x90 Cap
square neck bolt
M5x8 Hex
socket head
set screw
Flat washer 7
6-7 Shoulder pin
4. Loosen M5x8 Hex socket head set screw
Then, remove Shoulder pin and Flat washer 7
to be free Depth guide from Base.
M6x90
Cap square
neck bolt
Flat washer 6
Pipe 6
Depth guide
Pipe 6
P 6/ 18
Fig. 9
