DISASSEMBLING
R
epair
P 6/ 14
Note
: The subject parts can be removed without disassembling Motor section.
Disassemble Bearing box section as drawn in
Fig. 13 to Fig. 19
.
Fig. 13
Fig. 15
Fig. 17
Fig. 19
Fig. 18
Fig. 14
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Spiral bevel gear 37, Ball bearing 696ZZ and Ball bearing 6201DDW
Remove four M4x14
Pan head screws and
Bearing box from
Gear housing.
Remove Ball bearing
696ZZ with 1R269.
While opening Ring spring 11 with 1R004, pry and
remove it from Spindle with a slotted screwdriver.
Pry up
Open
1R004
Slotted
screwdriver
Fig. 16
Arbor press
Spindle
Spiral bevel
gear 37
1R258
Bearing box
Press down Spindle with 1R280.
Remove Retaining ring R-32 from
Bearing box with 1R291
Bearing box section can be disassembled. Be careful about each position and the direction of Labyrinth ring
Note
: When Spindle is removed from Spiral bevel gear 37, Ball bearing 6201DDW has a damage during the removal
process. Therefore, replace Ball bearing 6201DDW with a new one.
Spindle Labyrinth ring
M4x14 Pan head
screw (4 pcs.)
Bearing box
Ball bearing
6201DDW
O ring 45
Ball bearing 696ZZ
Flat washer 12
Ring spring 11
Spiral bevel gear 37
Retaining ring
R-32
Arbor press
1R280
Spindle
1R258
Spiral bevel
gear 37
Bearing box
Receive Bearing box on 1R258.
Provide an impact to Spindle carefully with Arbor press so that Arbor press
does not touch Spiral bevel gear 37
and Spindle sinks slightly.
1R291 Retaining ring R-32
Ball bearing
6201DDW
Bearing box
Turn Bearing box upside down.
Receive Bearing box on U groove of Arbor
press table as shown right, and press down
Flat washer 12 and Ball bearing 6201DDW
with 1R027
Flat washer 12/ Ball bearing 6201DDW
U groove of Arbor press table
1R027
Arbor press
Bearing box
Ring
spring 11
Gear housing
Bearing box
Ball bearing
696ZZ
M4x14 Pan head
screw (4 pcs.)
