DISASSEMBLING
R
epair
P 3/ 14
(1) Remove Gear housing cover with Rotor section from Motor housing. (
Figs. 2, 3 and 4
)
(2) Disassemble Rotor section. (
Fig. 5
)
Remove four 4x30 Tapping screws.
Fig. 2
4x30 Tapping
screw (4 pcs.)
4x30 Tapping screw (4 pcs.)
Gear housing
Gear housing
Bearing box
Bearing box
Gear housing cover
Fig. 5
Fig. 3
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Rotor, Ball bearing 629LLB/ 607LLB, Spiral bevel gear 10
Remove the assembled part of Gear housing and Bearing box
from Gear housing cover.
While holding Rotor by a gloved
hand, turn M6 Hex nut counter-
clockwise with a Wrench 10.
Wrench 10
M6 Hex nut
Rotor
Rotor
Gear housing cover
Spiral bevel gear 10
M6 Hex nut
Fig. 4
Thin slotted screwdriver
(First, turn it carefully to enlarge the gap
between Gear housing cover and Motor housing,
then pry off Gear housing cover with Rotor section.)
Groove to insert a thin slotted screwdriver
Insert a thin slotted screwdriver into the groove of Gear housing cover, and
remove Gear housing cover from Motor housing.
Gear housing cover
Motor housing
