P
5
/ 1
0
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Spiral bevel gear 31 for DA331D (cont.)
DISASSEMBLING
ASSEMBLING
Assemble Spiral bevel gear 31 by reversing the disassembly procedure. (Refer to
Figs. 4
,
3 and 2B
)
Fig. 4
2. Disassemble the gear section
by tapping the edge of Gear
housing with a plastic hammer.
Spindle
Bearing box
Spiral bevel
gear 31
Retaining ring S-12
Key 4
Retaining ring S-12
Ball bearing 608ZZ
3. Bearing box can be removed by hand. Remove Ball bearing 608ZZ
with 1R269, and remove Retaining ring S-12 with 1R291. Then,
Spiral bevel gear 31 is removed by hand. If it is difficult to remove
the gear by hand, remove it with 1R045.
Note
: Be careful not to lose Key 4.
(3) Disassemble Gear section as drawn in
Fig. 4
.
Gear section
