P 4 /13
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear Housing Cover Section
R
epair
1) Remove seven Tapping screws that fasten Handle (R) to Handle (L). (Fig. 6)
2) Remove Handles (R) and (L) from Motor housings (R) and (L) as illustrated in Fig. 6A.
3) Separate Gear housing cover section from Gear housing complete by unscrewing four CT4x16 Tapping screws.
(Fig. 7)
Fig. 6
Fig. 7
Tapping screw CT4x16 (4 pcs)
Gear housing cover section
Packing
Gear housing complete
Motor housing (R)
Motor housing (L)
Gear housing
cover section
Gear housing cover section side
Handle (R)
Handle (L)
Motor housing (L)
Fig. 6A
Motor housing (R)
A
Tapping screws that fasten
Handle (R) to Handle (L):
A: Tapping screw 4x18 (5 pcs)
B: Tapping screw 4x40 (1 pc)
C: Tapping screw 4x50 (1 pc)
B
C
A
By pulling Handles (R) and (L)
towards Gear housing cover
section side, each hook portion
of Handles (R) and (L) can be
disengaged from the notch between
Motor housings (R) and (L).
If you are disassembling Gear housing cover section
without removing Tool opener, unscrew this Tapping
screw while opening Tool opener fully.
DISASSEMBLING
