Fig. 5
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Depth Guide
DISASSEMBLING
Depth guide is joined to the Machine at the Handle section, and to Base at Rear angular guide.
Separate Depth guide by disassembling from Handle section and from Rear angular guide as drawn in
Fig. 5
.
1. Loosen Lever 55 by turning
toward the direction designated
with arrow.
2. Take off Stop ring E-8, and remove M6x85 Hex bolt, by
employing Lever 55 as a wrench. And remove Flat washer 6.
Now, Depth guide is disjoined from the machine.
Lever 55
Lever 55
Flat washer 6
M6x85
Hex bolt
Stop ring E-8
Pipe 6
Pipe 6
M6 Hex nut
3. Remove Pipe 6.
4. Remove M6 Hex nut, loosening M5x8
Hex socket head set screw.
5. Remove M4x20 Hex socket head bolt
and M4-7 Hex lock nut, pulling down
Base to the position in which they can
be easily removed. Now, Depth guide is
disjoined both from the machine
and Rear angular guide.
Base
M5x8 Hex socket head
set screw ( No need to remove completely.)
M4x20 Hex socket
head bolt
Rear angular
guide
M4-7 Hex
lock nut
Collar
Depth guide
6. Disassemble Depth guide, and remove two
Collars from the both side of Depth guide.
R
epair
P
5
/ 1
6
