![background image](http://html1.mh-extra.com/html/makita/bdf446/bdf446_technical-information_4240321006.webp)
P
6
/ 1
0
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear assembly and Motor section (cont.)
(4) Insert Armature into Yoke unit carefully and connect Motor section to Gear assembly. (
Fig. 11
)
(3) Put Leaf spring in place on the inside of Housing (L). (
Fig. 10
)
Fig. 11
Fig. 10
ASSEMBLING
3. Mount Speed change lever to Gear assembly. (Refer to
Fig. 14
)
notch
Notch must be located on Armature
drive-end as above.
[Wrong]
[Correct]
Note: Be careful when inserting
Armature as fingers can
be pinched and injured.
[Wrong]
[Correct]
Be sure to hold
Commutator portion
as your fingers
can be pinched by Armature fun due to strong magnetic
force toward Yoke unit.
2. Connect Motor section to
Gear assembly by engaging
Armature gear with Planetary
gears in Gear assembly.
Be sure to put Leaf spring
in place as drawn on the right.
Leaf spring
Housing (L)
1. Insert Commutator end
into Brush holder complete.