Makita 9556HN, Instruction Manual

Page: 3 / 88

3
ENGLISH (Original instructions)
Explanation of general view
1-1. Shaft lock
2-1. Switch lever
4-1. Wheel guard
4-2. Screw
4-3. Bearing box
5-1. Wheel guard
5-2. Bearing box
5-3. Screw
6-1. Lock nut 6-2. Depressed center grinding
wheel/Multi-disc
6-3. Inner flange
7-1. Lock nut wrench
7-2. Shaft lock
8-1. Lock nut
8-2. Abrasive disc
8-3. Rubber pad
10-1. Wire cup brush/Wire bevel brush
11-1. Lock nut
11-2. Abrasive cut-off wheel/diamond
wheel
11-3. Inner flange
11-4. Wheel guard for abrasive cut-off
wheel/diamond wheel
12-1. Exhaust vent
12-2. Inhalation vent
SPECIFICATIONS
Model 9556HN 9557HN 9558HN
Depressed center wheel diameter 100 mm 115 mm 125 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm
Spindle thread M10
M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
Rated speed (n) / No load speed (n
o
) 11,000 min
-1
11,000 min
-1
11,000 min
-1
Overall length 271 mm 271 mm 271 mm
Net weight 1.9 kg 2.0 kg 2.1 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
ENE048-1
Model 9557HN
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
Work mode : surface grinding
Vibration emission (a
h,AG
) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
can only be operated on single-phase AC supply. They
Vibration emission (a
h,DS
) : 2.5 m/s
2
or less
2
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model 9557HN, 9558HN
Uncertainty (K) : 1.5 m/s
Model 9558HN
Work mode : surface grinding
Vibration emission (a
h,AG
) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Sound pressure level (L
pA
) : 86 dB (A)
Vibration emission (a
h,DS
) : 2.5 m/s
2
or less
2
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 1.5 m/s
ENG902-1
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
ENG900-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
The vibration total value (tri-axial vector sum)
determined according to EN60745: used in a preliminary assessment of exposure.
•
The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.