![background image](http://html.mh-extra.com/html/makita/12-v-8413d/12-v-8413d_instruction-manual_224652010.webp)
10
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the bat-
tery cartridge is removed before carrying out any work on
the tool.
Replacement of carbon brushes (Fig. 14 & 15)
Replace carbon brushes when they are worn down to the
limit mark. Both identical carbon brushes should be
replaced at the same time.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by Makita
Authorized Service Center.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Screw bits
• Blow-out bulb
• Safety goggles
• Grip assembly
• Rubber pad assembly
• Foam polishing pad 125
• Depth rod
• Wool bonnet 100
• Various type of Makita genuine batteries and chargers
• Plastic carrying case
Noise and Vibration
ENG004-1
The typical A-weighted sound pressure level is 83 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 8 m/s
2
.
EC-DECLARATION OF CONFORMITY
ENH002-1
We declare under our sole responsibility that this product is
in compliance with the following standards of standardized
documents,
EN50260, EN55014
in accordance with Council Directives, 89/336/EEC and
98/37/EC.
Yasuhiko Kanzaki
CE 2003
Director
MAKITA INTERNATIONAL EUROPE LTD
MAKITA INTERNATIONAL EUROPE LTD
MAKITA INTERNATIONAL EUROPE LTD
MAKITA INTERNATIONAL EUROPE LTD....
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND