background image

 

Makim Makine Teknolojileri A.Ş. All rights reserved                                                                .                                                                           

 

Kullanım Kılavuzu

 

 

“Un-Permitted Entry Following Authorized 
Passage ( Optional

)” 

 
While the authorized person is passing through, 
another person follows without permission and 
this is unauthorized passage. The passage could 
be done but the warning buzzer will be on. 
 

“REVERSE DIRECTION” UNPERMITTED 
ENTRY

 

When  authorized  person  is  on  the  right  direction 
and unauthorized another person is on the reverse 
way, this causes unpermitted entry. Wings will be 
closed to  both  ways  in  this  situation and warning 
buzzer  will  be  on.  If  unauthorized  person  leaves 
the lane, the  wings  will  be opened for authorized 
one. 

 

“STANDING”  UNPERMITTED ENTRY  

 

If authorized person stands on the lane while 
passing, the entry will be unpermitted. After 15 
seconds the warning buzzer will be on and in 5 
seconds, if the passage is not done,the wings will be 
closed. Authorization will not be valuable. If the 
standing is done on the other side of wings, he/she 
can end the passings. And, if the standing is done 
between the wings, for safety regulatons the wings 
will not be closed and warning buzzer will be on, in 
the same way. 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for T300 HG120















Reviews: