background image

 

Makim Makine Teknolojileri A.Ş. All rights reserved                                                                .                                                                           

 

Kullanım Kılavuzu

 

 

“WAITING” UN-PERMITTED ENTRY

 

 
When the hiddengate is on normal waiting mode, 
if anyone get into passage area without authority, 
the sensors will detect and in 3 seconds the 
warning buzzer will be on. 

 

 

Orange Dashed-Line Light:

 

Everything is normal,awaiting for 

authorization for passage. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
4.3 WORKING PRINCIPLE 

Main board which is managing the hiddengate receives commend for passage and if all the 

conditions are fulfilled, the wings are opened. Passings can be both one by one and ensuingly.If 
more than one authorizations are given, those will be added to the memory and the same quantity of 
passages will be allowed. For this, 30 people can pass ensuingly.  
If the hiddengate detects no body even after authorization is given, a warning buzzer will be on after 
15 seconds and 5 more seconds will be given. After this 5 seconds, the authorization will be 
cancelled. 
 

4.4 UNAUTHORIZED ENTRY 

Unauthorized entries are not permited for passage. During unauthorized passages, the 

warning  buzzer wil be on and the symbols will be red cross. The wings keep closed. Upon the 
cause of element for unauthorized passage is disappeared, the hiddengate will turn to its standard 
mode.  
 
 
 
 
 
 

 

 
 
 
 

 

 
 
 
 
 
 
 
 

 

Summary of Contents for T300 HG120















Reviews:

Related manuals for T300 HG120