background image

 

Makim Makine Teknolojileri A.Ş. All rights reserved                                                                .                                                                           

 

13 

Kullanım Kılavuzu

 

 

8.PROBLEM AND SOLUTION 

Problem? 

Probable Cause? 

How to Solve? 

 

Wings do not work even if 
the power plug is on. 

 

Leds do not give light. 

 

No movement on the 
hiddengate. 

1.

 

No power is received. 

1.

 

Send power to the 
hiddengate. 

2.

 

Interior power cable is 
not on. 
 

2.

 

Check the interior power 
cable. 

3.

 

Blowing of fuse. 

3.

 

Change the blow. 

 

Power is received but 
wings do not work. 

1.

 

There is a problem 
preventing wings 
movement. 

1.

 

Wings are checked when 

they are released. Be careful 
not to make it touch to plate. 

 

Wings work but no voice 

is heard. 

1.

 

Buzzer is failed. 

1.

 

Change the buzzer. 

 

2.

 

Buzzer plug is off.  

2.

 

Check the buzzer plug. 

 

3.

 

System is working 

faulty. 

3.

 

Check the system. 

 

Wings stay open. 

1.

 

There may be preventing 
jamming while closing. 

1.

 

Check it by hand. 
 

2.

 

There may be fault on 
the program. 

2.

 

Check the program. 
 

3.

 

There may be fault on 
the sensors. 

 

3.

 

Change the sensors. 

 

Wings do not open 

although permission is 

given with green arrow 
sign. 

1.

 

Sensors may not see 
eachother. 

1.

 

Sensors must be checked 
as to see eachother well. 

 

Hiddengate does not 

reset itself after the 

specified time of passage 

permission is ended. No 
passage direction info is 

seen after the passing is 

done. 

 

1.

 

Program may be faulty. 

 

1.

 

Renew the program. 
 

 
2.

 

Card may be faulty. 

2.

 

Change the card. 

 

Buzzer contiunously 

gives alarm when the 
wings are closed. 

1.

 

Sensors do not see 

eachother. 

1.

 

It may be because of 

dust,clean the plexyglass. 

2.

 

Sensors are faulty. 

 

2.

 

Change the sensors. 

 

Wings stay in half 

opened position. 

1.

 

Wings have touch with 
chassis. 

1.

 

Check by hand if they 
work or not. 

2.

 

Jamming in the 
mechanism. 

2.

 

Check the mechanism 
parts and oil them. 

 
 

Summary of Contents for T300 HG120















Reviews:

Related manuals for T300 HG120