Makim Makine Teknolojileri A.Ş. All rights reserved .
12
Kullanım Kılavuzu
6.2- CARRIAGE INSTRUCTIONS
1.
Be careful to carry the hiddengates with the packages prepared by MAKIM.
2.
Abide by the carriage instructions written on the packages.
3.
Do not put a heavy material on the package. Abide by the stowing instructions.
4.
Do not put the packaged hiddengate on a wet floor.
5.
Carry the hiddengate on an elevator suitable for its weight.
6.
Before you start the mounting, check if any damage occured while carriage, if the parts for
mounting and connections are all ready.
7.HIDDENGATE MAINTENANCE INSTRUCTIONS
The maintenance suggestions and times here are only given with aim of general information and
example. It is advised for the user to decide the maintenance according to the usage, environment
and climate conditions.
Do not use corrosive chemical matters while doing maintenance. While cleaning sensor Windows,
use a clean dry fabric and do not make any compress. Outer steel body can be cleaned with a wet
fabric once in month.
External connection screws must be checked visually once in every three months. If you detect any
relaxation on the screws, contact with the seller agent or manufacturer.
Periodical maintenance of the hiddengates must be done by authorized service personnel. If any
need occurs, you can contact the manufacturer and receive information about periodical
maintenance.
Maintenance to be done by authorized service or seller agent:
PART
TIME
OPERATION
Top and Buttom Bearings of
the Wings
4 Months
Oiling
Floor Mounting Screws
6 Months
Control
Mechanism Screws
6 Months
Control
Engine
12 Months
Control
Electronic Card
12 Months
Cleaning
Sensor
12 Months
Cleaning
Cable Connections and
Sockets
12 Months
Control
