manualshive.com logo in svg

MakerBot Replicator 2, User Manual

Share
Download
MakerBot Replicator 2 User Manual Download Page 55

55

E

  TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE

mAiNTENANCE   

CONTINUED

Adjusting the Plunger   |   Continued

Open a Support Ticket

2.  After you’ve removed the bolts, move the 
active cooling fan to the side. Push the fan 
wire out of the way so you have a clear view 
of the black plastic drive block.

3. Locate the small round hole in the drive 
block. Insert the 2mm hex wrench included 
with your Replicator 2 into the hole until you 
feel it seat itself in the set screw inside.

4. Turn the hex wrench very slightly 
clockwise, no more than an eighth of a turn.

5. Remove the hex wrench.

6. Reseat the active cooling fan, being 
careful of the fan wires.

7. Use the 2.5mm hex wrench to bolt the 
active cooling fan onto the extruder.

Sometimes a new issue comes up that isn’t in the User Manual. The experts on our Support 
Team can help walk you through it. Open a ticket by emailing [email protected].

Summary of Contents for Replicator 2





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands