MakerBot Replicator 2, User Manual

Page: 16 / 60

16
iNSTALLiNg ThE BUiLD PLATE
B SETTING UP YOUR MAkERBOT REPLICATOR 2 DESkTOP 3D PRINTER
5a. Locate the build plate. Tilt and fit the
notch in the build plate onto the tab at the
back of the build platform. Fit the tab in the
build plate between the two pegs at the
front of the build platform.
5b. To remove the build plate, push the
small flexible tab on the build plate
toward the back of the build platform to
release the tab from the pegs. Lift the
build plate from the build platform.
6a. Use scissors to cut the three bands
that hold the extruder in place. Discard
the bands.
NOTE: Operate scissors with care.
5
Installing the Build Plate
6
Freeing the Extruder