![background image](http://html.mh-extra.com/html/maker-made/m2/m2_setting-up_697185052.webp)
52
M2 ASSEMBLY GUIDE
CNCjs does not control your router, it only controls your M2. You must manually turn your
router on and off.
In case of an error always turn off your router before you turn off your M2.
Always remember to turn on your router before clicking “Run” in CNCjs and turn off your
router after the M2 is paused, stopped, or has completed the project.
It’s a good idea to make sure you’re behind the waste board when you declamp materials, as
they can fall to the ground on your foot. Nobody wants that.
When installing the frame, we recommend a friend help connect the spring and each person
wear safety goggles during stretching. The chain can snap back causing damage to self and
surroundings.
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8