![background image](http://html.mh-extra.com/html/maker-made/m2/m2_setting-up_697185011.webp)
11
M2 ASSEMBLY GUIDE
3. MOUNT MOTORS
The M2 moves side to side (X,Y) from the commands given to the motors by the Arduino DUE.
The motors mount into the Motor Mounts on the ends of the Top Beam.
STEP 1:
Place motor in bracket
STEP 2:
Slide lock washers over screws and fasten screws through the front of the motor
STEP 3:
Mount into aligned holes and ensure the motor shaft is on the outside edge on each side, as
shown in picture
STEP 4:
Attach Motor Sprocket by inserting the grub screw into the sprocket hole, aligning with the
flat side of the motor shaft, and tightening with Allen wrench to prevent slipping
STEP 5:
Plug 6 pin motor wire into motor, connection will only seat in one direction
STEP 6:
Repeat for other side
Bag E
Bag E
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8