50
M2 ASSEMBLY GUIDE
Now when you run your M2, you can begin from where you set your temporary home position!
We recommend cutting 3 or 4 times and measuring until your cuts are near exact to your
Gcode.
You now know how to start making projects on the M2. Happy making!
16. MEASURE CUTS AND SCALING
After your first cut, measure from the center of the cuts across the X and Y Axis and compare
it to your Gcode file.
Enter the X values in the X Scaling.
Then enter the Y values in the Y Scaling.
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8