12
M2 ASSEMBLY GUIDE
4. MOUNT ARDUINO DUE
At the M2’s core is an Arduino DUE microcontroller. We recommend mounting the DUE to the
wall behind your Wasteboard, but it can be mounted in any safe location where it won’t be
stepped on or conflict with the M2 during operation.
Note:
Unfortunately, with the initial version, the hole for the MicroUSB is for the wrong port. You will need
to remove the DUE and mount it without its case, or modify the case to plug in the MicroUSB into the
covered hole. We apologize for the inconvenience and appreciate your understanding,
With Case
Without case (notice how the “DUE”
written on the board is upside-down, that
is the orientation for these instructions)
STEP 1:
Using included screws, mount Control Board in its case to wall behind Wasteboard
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8