19
③
Confirm the setting. After selecting EPO input polarity, press and hold the function
setting key
for more than half a second (less than 2 seconds). Now, the setting is
confirmed.
④
Exit from the setting interface. Press and hold function setting key
for more than
half a second (less than 2 seconds), exit from the setting interface and return to main
interface.
4.3.9
(Battery) End of discharge setting
（
9
）
①
Enter the setting interface. Press and hold the function setting key
for more than
2 seconds, then come to setting interface ,short press the scroll key
for more than
half a second (less than 2 seconds) to select Eod setting, the letters “Eod” will flash.
②
Enter the Eod setting interface. Press and hold the function setting key
for more
than half a second(less than 2 seconds) at this time, the letters “Eod” will stop
flashing.
③
Set the Eod tolerance range. Short press the scroll key
or for more than half a
second (shorter than 2 seconds)to select the voltage range in percentage. 10.0V,
10.5V, 11.0V (default is 10.0V)
，
then short press function setting key
for more than
half a second (shorter than 2 seconds)to confirm the selection, then to set the minus
range
④
After the minus range is confirmed. Long press function setting key
for more
than 2 seconds to exit setting menu..
4.3.10
Frequency Converter mode setting
（
10
）
①
Enter the setting interface. Press and hold the function setting key
for more
than 2 seconds, then come to setting interface, Press and hold the scroll key
for
more than half a second(less than 2 seconds), select the function setting, choose
output frequency setting interface, the letters “OPF” will flash.
