Major Science MC-0203, Instruction Manual, Page: 6 / 58

5
10. Use appropriate materials and operate correctly to avoid possible hazards
of explosion, implosion or release of toxic or flammable gases arising from
overheated materials.
11. Always use the block lifter to remove hot blocks, and wear appropriate
protection to avoid burning your hand.
12. The instrument is intended for scientific research use only, and must be
operated by qualified personnel who realize the potential risks of the use
of this instrument. Major Science makes no claim that its instruments are
designed or certified as medical device; no representation, promises,
express warranty, or implied warranty will be made concerning the
suitability of these instruments for any medical use. Major Science will not
provide customers any notice or certification concerning its products being
compliant as a medical device.
Safety Information
Use high level of precaution against any electrical device. Before connecting
the electrical supply, check to see if the supply voltage is within the range
stated at the rating label, and see to it that the device be seated firmly. Place
the unit in a safe and dry location; it must NOT touch the surrounding. Follow
the safety precautions for chemicals / dangerous materials. If needed, please
contact qualified service representative or
service@majorsci.com
Environmental Conditions
Ensure the instrument is installed and operated strictly in the following
conditions:
1. Indoor use only
2.
(non-condensing)
3. 75 kPa – 106 kPa
4. Altitude must not exceed 2000 meters
5. Ambient to 40°C operating temperature
6. Pollution degree: 2
7. Mains supply voltage fluctuations up to ±10% of the normal voltage
Avoiding Electrical Shock
Follow the guidelines below to ensure safe operation of the unit.
Mini cooler Incubator has been designed to use with shielded wires thus
minimizing any potential shock hazard to the user. Major Science
recommends against the use of unshielded wires.
DOMINIQUE DUTSCHER SAS