28
5. Use
and then press
key and
key to move cursor to
the parameter. Use
key and
key to change the parameter.
Press
key to store the updated value and use
to enter next
screen. Press
key return to select operation mode page.
c. Holding Time Holding time for each step
6. Use
and then press
key and
key to move cursor to
the parameter. Use
key and
key to change the parameter.
Press
key to store the updated value and use
to enter next
screen. Press
key return to select operation mode page.
d. Final Temp. Temp. for end step
7. Press
key to start the program.
8. Press
key again to stop the unit. A confirm page will pop out, select
“YES” to leave the mode.
DOMINIQUE DUTSCHER SAS
Summary of Contents for MC-0203
