Major Science MC-0203, Instruction Manual, Page: 23 / 58

22
6. Press again to stop the device. A confirm page will pop out, select
“YES” to leave the mode .
Note (2):
When running Constant Mode, the current temperature of block and the step
settings will show on the screen.
There are two situations for running time:
Case 1: set time is zero, it will run continuously.
Case 2: set time is great then zero. Once the current block temperature reach
the set temperature, the running time starts counting down to zero and stop
temperature control.
Press key to display the set temperature and time. It will be kept on
screen for 5 seconds or just press key again to go back monitor
screen immediately.
DOMINIQUE DUTSCHER SAS