53D0419
33
#1
#2
#3
#4
#5
#6
7#
Electronic Valve
GRAY #7
RED #2
RED #2
BLACK #4
GREEN #6
BLUE #1
BLUE
YELLOW
YELLOW
WHITE #3
MAGENTA #5
15’ Wall Switch Wire
BLACK
WHITE
Switch
RS
OFF
ON
Transformer
Secondary
24V
WHITE
WHITE
GREEN
BLACK
BLACK
Primary - 120V
To Junction Box
Pilot Assembly
Spark
Sense
Ignition Module (Synetek)
HI
LO
EV1
EV2
ELECTRICAL INSTALLATION
ELECTRONIC PILOT IGNITION WIRING
REMOTE WALL SWITCh
Position the wall switch. Do not extend beyond the 15 feet of wire.
OPTIONAL DC REMOTE SySTEMS
See section entitled
Hearth Mount
in the Millivolt hand held remote instructions supplied with the
remote.
1. Plug in remote connector wire to remote receiver.
2. Connect the wire terminal from the remote receiver. This replaces the 15' wall switch connetion
to the switch.
Figure 42
3. Mount remote control receiver at junction box (for your wall switch).
Figure 42 -
Remote Wall Switch Wiring Diagram
W
ARNING
Do not connect 110-120 VAC to the
Remote Wall Switch. The appliance
will malfunction.
FP2067
