background image

        DANGER 

·

 FLAMMABLE GAS UNDER PRESSURE.

LEAKING LP-GAS MAY CAUSE A FIRE OR EXPLOSION IF IGNITED 

CAUSING SERIOUS BODILY INJURY OR DEATH.

CONTACT LP GAS SUPPLIER FOR REPAIRS, OR DISPOSAL OF THIS 

CYLINDER OR UNUSED LP-GAS.

        WARNING

 

·

 FOR OUTDOOR USE ONLY.*

          DO NOT USE OR STORE CYLINDER IN A BUILDING, 

GARAGE OR ENCLOSED AREA.

WARNING: 

Know the odor of  LP-gas. If you hear, see or smell 

leaking LP-gas, immediately get everyone away 

from the cylinder and call the Fire Department. 

Do not attempt repairs.

Caution your LP-gas supplier to:

    Be certain cylinder is purged of trapped air prior

    to first filling.

    Be certain not to over fill the cylinder.

    Be certain cylinder requalification date is checked.

LP-gas is heavier than air and may settle in low 

places when dissipating.

Contact with the liquid contents of cylinder will 

cause freeze burns to the skin.

Do not allow children to tamper or play with cylinder.

When not connected for use, keep cylinder valve 

turned off. Self contained appliances shall be limited 

to a cylinder of 30 lb capacity or less.

Do not use, store or transport cylinder where it would 

be exposed to high temperatures. Relief valve may 

open allowing a large amount of flammable gas to 

escape.

When transporting, keep cylinder secured in 

an upright position which cylinder valve turned off.

       DO NOT REMOVE, DEFACE, OR OBLITERATE THIS LABEL

*EXCEPT AS AUTHORIZED BY ANSI/NFPA 58.

DANGER. 

Do not store a spare LP cylinder under or near a barbecue grill, or other

heat sources. NEVER fill an LP cylinder beyond 80% full: a fire causing death or 

serious injury may occour.

WHEN CONNECTING FOR USE:

Use only in compliance with appliable codes.

Read and follow manufacturer’s instructions.

Consult manufacturer’s instructions

concerning the cylinder connection provided

with your appliance.

Be sure regulator vent is not pointing up.

Turn off all valves on the appliance.

Do not check for gas leaks with a match or

open flame. Apply soapy water at areas 

marked ”X”. Open cylinder valve. If bubble

appears, close valve and have LP-gas

service person make needed repairs. Also,

check appliance valves and connections to

make sure they do not leak before lighting

appliance.

Light appliance(s) following manufacturer’s

instructions.

When appliance is not is use, keep the

cylinder valve closed.

X

X

X

X

X

Cylinder

Pressure relief valve

Cylinder valve hand wheel

Point of connection

Liquid level indicator

(optional)

·

·

·
·
·

·

·

·

·

·

·

·

·

·

·
·

Please keep this instruction manual for future reference

 

C

US

R

Assembly Instructions

 

   

 

 

32 Inch Gas Fire Pit

 

 

 

WARNING

READ INSTRUCTION MANUAL BEFORE ATTEMPTING ASSEMBLE OR

 

OPERATE THIS PRODUC

T

Keep the screws and parts out of reach of children. 

ITEM NO.

 GYM-80004

(Made in China)

Contact the Customer Service Team at e-mail: [email protected]

Summary of Contents for GYM-80004






































Reviews: