background image

23

CR Series Woodburning Fireplaces

20001316

LIMITED WARRANTY & 30 YEAR PROTECTION PLAN

For MAJESTIC FIREPLACES

®

 PRE-ENGINEERED Fireplace Systems

CFM Corporation warrants its MAJESTIC FIREPLACES® Pre-
Engineered  Fireplace  (“Fireplace”)  and  the  CFM  Corporation 
supplied firegrate, glass doors, outside air system, fan motor, 
and liners to be free from defects in material or workmanship, 
as follows:

A. Fireplace and Chimney Components:

 (exclusive of CFM 

Corporation-supplied firegrate, glass doors, outside air system, 
fan motor, and liners all of which are covered by separate war-
ranties under paragraphs B through D below): At its option for a 
period of thirty (30) years from the date the Fireplace is installed, 
CFM Corporation will;
1.  For a period of five (5) years from the date the Fireplace is 

installed, CFM Corporation, at its option, will repair or replace 
any defective part without charge.

2.  Thereafter,  through  the  10th  year  after  the  date  the  Fire-

place is installed, if replacement parts are available, CFM 
Corporation will provide a replacement for any defective part 
without charge for the part itself.  The consumer must pay 
for everything else other than the part.

3.  Thereafter, through the 30th year after the date the Fireplace 

is installed, if replacement parts are available,CFM Corpora-
tion will provide a replacement for any defective part at a cost 
to the consumer of CFM Corporation then current list price, 
FOB CFM Corporation factory.

B. Firegrate, Glass Doors, Outside Air System:

For a period of 90 days from the date the Fireplace is installed 
CFM Corporation, at its option, will provide a replacement for 
any defective part, without charge for the part itself, FOB CFM 
Corporation factory, (The consumer must pay for everything else 
other than the part,).

C. Fan Motor:

1.  For a period of one (1) year from the date the Fireplace is 

installed, CFM Corporation, at its option, will repair or replace 
any defective part without charge.

2.  Thereafter, through the 30th year after the date the Fireplace 

is  installed  CFM  Corporation,  at  its  option,  if  replacement 
parts are available, will provide a replacement for any defec-
tive part at a cost to the consumer of CFM Corporation then 
current list price, FOB CFM Corporation factory.

D. Liners (Refractory or Metal):

1.  For a period of two (2) years from the date the Fireplace is 

installed, CFM Corporation, at its option, will repair or replace 
any defective part without charge.

2.  Thereafter, through the 30th year after the date the Fireplace 

is installed CFM Corporation, if replacement parts are avail-
able, will provide a replacement for any defective part at a 
cost to the consumer of CFM Corporation then current list 
price, FOB CFM Corporation factory.

This warranty is subject to the following conditions and limita-
tions:
1.  This warranty is extended only to a Fireplace installed in the 

continental United States, the state of Alaska and Canada; 
only if and so long as the Fireplace is installed or serviced by a 
qualified installer, preferably NFI or WETT (Canada) certified, 
and according to the installation instructions furnished with 

the Fireplace, and operated at all times under normal condi-
tions, use and service according to the operative instructions 
furnished with the Fireplace, and only if and so long as the 
Fireplace is not removed from its original installation.

2.  This warranty is non-transferrable, and is made to the original 

owner,  provided  that  the  purchase  was  made  through  an 
authorized supplier of the Company.

3.  The sole and exclusive remedies for breach of any warranties 

hereunder shall be for the repair, replacement or provision 
of a replacement part at CFM Corporation then current list 
price, FOB CFM Corporation  factory, for any defective part 
as specified in paragraphs A through D.

4.  CFM Corporation shall not be liable for damage from any 

smoking  of  a  MAJESTIC  FIREPLACES  Pre-Engineered 
Fireplace  System  related  to  environmental  geographic 
conditions (such as, for example, nearby structures or roof 
peaks, trees, hills, or mountains), inadequate ventilation, or 
negative air pressure in the place where the Fireplace system 
is installed, related to any mechanical system (such as, for 
example,  furnaces,  fans,  air  conditioners,  clothes  dryers, 
etc.)

5.  Except  as  otherwise  expressly  specified  in  paragraphs A 

through D, NONE OF THESE WARRANTIES COVER, AND  
CFM CORPORATION SHALL NOT BE RESPONSIBLE FOR, 
ANY CONSTRUCTION, INSTALLATION, LABOR, TRANS-
PORTATION OR OTHER COSTS OR EXPENSES ARISING 
FROM A DEFECTIVE PART, ITS REPAIR OR REPLACE-
MENT OR OTHERWISE, NOR SHALL CFM CORPORATION 
IN ANY EVENT BE RESPONSIBLE FOR ANY INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT 
TO THE EXTENT REQUIRED BY LAW.  Some states do not 
allow the exclusion or limitation of incidental or consequential 
damages,  so  this  exclusion  or  limitation  may  not  apply  to 
you.

NO  IMPLIED  WARRANTIES,  INCLUDING  THE  IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE, SHALL REMAIN IN EFFECT AF-
TER THE EXPIRATION OF THE WARRANTIES SET FORTH 
IN PARAGRAPHS A THROUGH D.  Some states do not allow 
limitations on how long an implied warranty lasts, so this limita-
tion may not apply to you.
In  order  to  obtain  performance  of  any  of  the  above  warranty 
obligations write to CFM Corporation at this address:
   

CFM Corporation

   

410 Admiral Blvd.

   

Mississauga, Ontario, Canada L5T 2N6

   

Attention: Director of Warranty Services

Since local building requirements may vary greatly throughout 
the country, users of CFM Corporation products should deter-
mine in advance whether there are any building code restrictions 
on the use of a specific product. CFM CORPORATION MAKES 
NO REPRESENTATION OR WARRANTY REGARDING, AND 
SHALL NOT BE RESPONSIBLE FOR, ANY BUILDING CODE 
COMPLIANCE.
The foregoing warranties give you specific legal rights and you 
may also have other rights which vary from state to state.

Summary of Contents for CR36R

























Reviews: