background image

2

CR Series Woodburning Fireplaces

20001316

Safety Information

PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING FIREPLACE.
IMPORTANT: 

Read all instructions and warnings carefully before starting installation.  Failure to 

follow these instructions may result in a possible fire hazard and will void the warranty.

Description

The CR36R/L Series fireplaces are multi-sided solid fuel, 
woodburning fireplaces. These are radiant models only 
and include a preinstalled outside air kit.

Precautions

CFM Corporation fireplaces and component parts have 
been highly tested and will operate safely when installed 
in accordance with instructions provided in this manual. 
Carefully read and understand all instructions 

before

 

beginning installation.
If you notice any damage to fireplace or component parts, 
immediately report damage to your Majestic Fireplaces 
dealer.
Only use CFM Corporation components or the warranty 
will be voided and a fire hazard may be created.
CFM Corporation warranty will be voided by and CFM 
Corporation disclaims any responsibility for the following 
actions:

• 

Installation by any other than a qualified install-
er, preferably NFI or WETT (Canada) certified.

• 

Installation of any damaged fireplace or chim-
ney component;

• 

Modification of fireplace, chimney assembly or 
any component parts thereof; 

(except for chase 

flashings as detailed in the Chimney Top installa-
tion instructions).

• 

Installation other than as instructed by CFM 
Corporation; or

• 

Installation and/or use of any component part 
not manufactured or approved by CFM Corpo-
ration in combination or assembly with a CFM 
Corporation fireplace system, notwithstanding 
any independent testing laboratory or other 
third party approval of such component parts 
or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in 
compliance 

before 

installing the fireplace.

Fireplaces must be vented to the out-of-doors.

Do not obstruct or modify air inlets/outlets in any 
manner. 
Do not install combustible materials on any of the 

black fireplace surround.
Burn only solid wood fuel or gas logs.
Do not install a solid fuel burning insert or other 
products not specified for use with this fireplace.

Safety Information ......................................... 2
Specifications and Framing ........................... 3
Parts Identification  ........................................ 4
Chimney Requirements  ................................ 5
Planning Information ..................................... 6
Installation  .................................................... 7
Replacement Parts ...................................... 17
Accessories  ................................................ 18

Table of Contents

Drafts

The fireplace should not be located in areas that create 
drafts (ie: frequently opened doors and central heating air 
inlets/outlets) that hamper the normal flow of air into the 
fire.

Gas Logs

If you plan to install a gas log, the gas line should be 
installed 

before

 framing the fireplace. The gas line must 

be installed by a certified gas line installer.

Proposition 65 Warning:

 Fuels used in gas, wood-

burning or oil fired appliances, and the products of 
combustion of such fuels, contain chemicals known to 
the State of California to cause cancer, birth defects 
and other reproductive harm.
California Health & Safety Code Sec. 25249.6

WARNING: Check with your electronics manufacturer 
before installing a television or other electronic de-
vice above this fireplace.

CR36R / CR36L

Listed

UL / ULC-S610

Standard for Factory Built Fireplaces

Summary of Contents for CR36R

























Reviews: