MIEN5208 Series Managed Industrial Ethernet Switch
- 22 -
Port list: Select the default forwarding port of the multicast packet whose
destination address is this multicast MAC address. To which port to forward,
you can tick it.
Processing list: This column is used to operate the multicast table, buttons
and to add and delete static MAC addresses. The existing static multicast
entries are displayed in the following table. Whenever the user opens the web
page or performs the operations of adding and deleting, the table frame is
updated. As shown in Figure 3-21. Broadcast forwarding address
(01-00-5E-00-00-01).
Attention :
1.Please do not use unicast address as input address;
2.Do not enter the reserved multicast MAC address, such as:
01-00-5E-00-00-XX (reserved multicast management MAC address),
01-80-C2-XX-XX-XX (reserved Ethernet bridge) Manage MAC address).
4.6.5. Alarm configuration
Relay alarm:
The main switch of the relay alarm function, which is
disabled by default.
Type of alarm:
The type of alarm event of the relay, including ring status
alarm and port status alarm. Each option is controlled by the relay alarm
enable/disable. You can enable only one item or both.
Ring network status alarm:
Monitors the loop status in the network.
When the ring alarm is selected, if the network is looped, the alarm is
generated. When the loop alarm is selected, the alarm is generated if the
network is not looped. The alarm information is displayed after the
corresponding item (shown in red).
Port status alarm: Monitors whether each port of the switch is offline.
Selects to monitor one or more ports. As long as the port is offline, it will be
alarmed (red). If there is no monitored port, even if the line is dropped, the
alarm will not be triggered. The corresponding port only displays. Its actual
connection status.
4.6.6. Port mirroring
The port mirroring function is to copy all the data sent and received by one
or more ports to another designated port. By specifying one port as the mirror
port of another port, you can observe all the data sent and received by other
ports through this port. The port mirroring function is usually used to diagnose,
debug, and analyze the network.
This series of switches supports port mirroring, allowing users to capture
the entry, exit, or all data of the target port. The switch supports many-to-one
