MIEN5208 Series Managed Industrial Ethernet Switch
- 14 -
Device Number
: The number of the switch.
MIEN5208 Series Industrial Ethernet Switch User Manual
System time
: The current time of the switch is synchronized with the time
of the PC accessing the switch.
Hardware version
: The current hardware version of the switch.
Software version
: The current software version of the switch.
IP address
: The IP address of the switch.
MAC address:
MAC address of the switch.
The port information part displays the real-time status of each port of the
switch, including connection status, port speed, duplex mode and
Port type. The status of the port will be refreshed automatically, without
manual refresh.
4.5. Basic function
Basic functional include: port configuration, speed configuration.
4.5.1. basic information
Port configuration is used to configure the parameters of each port of the
switch,
Port setting as below page :
port setting is default setting , every setting as below :
Port ID :
showing the Ethernet switch’s all ports , as picture have 8 ports .
Interface Type :
that show every communication port style , such as :
RJ45 port or optic connector , above picture RJ-45 port and optic port have ,
have no related with connector.
Baud rate Mode :
including auto—negotiation,10 M ,100M rate three kinds.
Auto—negotiation is default , 10 M ,100M rate is force style.
Duplex mode:
having 2 choice, full duplex and half duplex, just start using
at enforcement rate(when auto-negotiation , its invalid )
Port status :
If choose that port will use, if not choose , that port will forbid.
Flow control: flo
w control is used to manage data transferring of two
node points, two node points must all support flow control is valid , If network
