![background image](http://html1.mh-extra.com/html/maiwe/mien5208-series/mien5208-series_user-manual_3783280025.webp)
MIEN5208 Series Managed Industrial Ethernet Switch
- 19 -
Port number: The label of the switch port. There are 8 ports .
PVID: The default VLAN ID of the port. The PVID of the access port is the
same as the VLAN it allows to pass. The PVID of the trunk port and the hybrid
port must be one of the VLANs it allows to pass.
Port mode: The type of switch port, which is divided into access port, trunk
port, and hybrid port.
Access port: Access port, connected to PC or terminal, can only belong to
1 VLAN.
Trunk port: A trunk port that connects to a network device with VLAN
function. It can allow multiple VLANs to pass through and receive and send
packets of multiple VLANs.
Hrbrid port: A hybrid port that can be used to connect between switches. It
can also be used to connect to a PC. It can allow multiple VLANs to pass
through and can receive and send packets of multiple VLANs.
List of allowed VLANs: A collection of VLANs that are allowed to pass, or a
collection of VLANs that are added to this port. The access port allows only one
VLAN to pass through. The trunk port and the hybrid port allow multiple VLANs
to pass through, but they are limited by the switch chip. There can be at most
64 and cannot be empty. The value range is 1-4094, and the values are
connected by "," and "~". For example, "1, 2, 4~6" means that the port allows
VLANs 1, 2, 4, 5, and 6 to pass.
Export unmarked VLAN list: A collection of outgoing VLANs that are not
marked. For the access port, the value of this packet is fixed to "1~4094",
which means that the label of all outgoing packets will be stripped. For the
trunk port, this value is fixed to null by default, indicating that all outgoing
packets are not labeled. It will be stripped; for Hybrid ports, this value can be
configured, ranging from 1-4094, with "," and "~" connections between values.
For example, “1, 2, 3~6” means that if the VID is out of the port, if the VID is 1,
2, 3, 4, 5 or 6, the label will be stripped, and the labels of other messages will
be retained.
View the currently configured VLAN table.:After the VLAN configuration is
complete, click View the currently configured VLAN table. The current
configured VLAN group is displayed in the box below. If the target is not met,
you can continue to configure it in the upper configuration area. The goal has
been reached and can be saved by clicking on "Configuration".
Attention:
Note that the default VLAN of the switch is 1, and all ports are defaulted
as access ports and added to VLAN 1.