MyPower S6600 Series Routing Switch Installation Manual
Installation Preparations
copyright
©
2015 Maipu All rights reserved.
1
6
666
Device
Device
Device
Device Maintenance
Maintenance
Maintenance
Maintenance
This chapter describes the changing and maintaining of the device modules,
containing:
6.2 Dust Maintenance of the Device
6.1
6.1
6.1
6.1
Change
Change
Change
Change Modules
Modules
Modules
Modules
�
Keep the replaced hardware module and it is recommended to place it in the
anti-static bag or the packing box.
6.1.1
6.1.1
6.1.1
6.1.1
Change
Change
Change
Change Power
Power
Power
Power Module
Module
Module
Module
Preparation
Preparation
Preparation
Preparation before
before
before
before Changing
Changing
Changing
Changing
Step 1:
Wear the anti-static wrist and confirm that the anti-static wrist is well-grounded.
Step 2:
Close the power switch of the AC or AC power module (set the switch to OFF).
Step 3:
Unplug the power connection cable on the AC or DC power module.
�
When moving the power module, use the hands to support the bottom of the
module parts. Do not hold the handles of the module to move.
�
The power module supports hot-swap and you can change the power when
