Installation Preparations
MyPower S6600 Series Routing Switch Installation Manual
4
copyright
©
2015 Maipu All rights reserved.
Step 1:
Confirm the installation location of the guide rail on the cabinet and use the marker
pen to mark the installation hole.
The space height above the guide rail is larger than the height of the installed
switch chassis and there is enough margin (IU is suggested). The diagram of the
distance above the guide rail is as follows (taking SM6600-04-MF as an
example):
F
F
F
F
I G U R E
I G U R E
I G U R E
I G U R E
3
3
3
3
4
4
4
4 T
T
T
T
H E
H E
H E
H E D I A G R A M
D I A G R A M
D I A G R A M
D I A G R A M O F
O F
O F
O F T H E
T H E
T H E
T H E D I S T A N C E
D I S T A N C E
D I S T A N C E
D I S T A N C E A B O V E
A B O V E
A B O V E
A B O V E T H E
T H E
T H E
T H E G U I D E
G U I D E
G U I D E
G U I D E R A I L
R A I L
R A I L
R A I L
�
To ensure the stability of the cabinet, try to install the heavy and high device
under the cabinet.
�
For dimension of S6600 series routing switch, refer to
.
Step 2:
Install the guide rails of the two sides respectively, the heights of the guide rails at
the two sides should keep consistent, and tighten the screws.
�
For different kinds of cabinets, the appearance and installation method of the
guide rail may be different. The content of this section is just for reference.
Please subject to the actuality.
�
To install multiple devices on the cabinet, please install the heavy device under
the cabinet.
