MyPower VG2000 V4 VoIP Gateway Installation Manual
Page
58 / 72
LINK RJ45 left indicator on indicates that the fast Ethernet
link is connected and indicator off indicates that the link is not
connected.
Rx/Tx RJ45 right indicator flash indicates that the fast
Ethernet interface can normally receive and send data.
CONSOLE
Rx CONSOLE port data receiving indicator
Tx CONSOLE port data sending indicator
6.1.3 POTS(FXS) Port Description
The device provides 16 RJ45 interfaces, and each RJ45
interface supports 4-FXS, used to connect the telephone
terminal.
6.2 Mechanical Installation
6.2.1 Cabinet Installation
It is recommended to install the MyPower VG2000-64S VoIP
gateway to the 19-inch standard cabinet. When the cabinet is
unavailable, you can place the device horizontally on the clean
plane. Keep at least 10cm space around the device to ensure
enough heat dissipation space. It is recommended to install
the air conditioner in the area with hot summer. The
installation process is as follows:
Step 1: Check the cabinet.
Before installing the device, reserve enough empty slot
space for installing the device.
