MyPower VG2000 V4 VoIP Gateway Installation Manual
Page
54 / 72
setpe1 to step 2.
Note
If the power indicator is still off after repeating the
preceding steps, contact the agent.
5.3 Cable Connection
5.3.1 Console Cable Connection
Console cable model: C1223-1032. Connect the cable by the
following steps:
Step 1: Prepare a PC or compatible PC with standard RS-232
serial port.
Step 2: When either MyPower VG2000-48S VoIP gateway or PC
is power-down, connect the console cable respectively to the
RS-232 serial port of the PC and the console port of the
MyPower VG2000-48S VoIP gateway.
Note
1. The default configuration of MyPower VG2000-48S VoIP
gateway: baud rate 9600, 8 bit data, no parity check, 1 stop
bit, no flow control.
2. Check the identifier on the interface to avoid inserting
incorrectly to other interfaces.
5.3.2 Ethernet Cable Connection
Straight-through Ethernet cable model: C1212-1002. Connect
the Ethernet interface by the following steps:
