MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 41 of 95
Notification Source Interface
: The source interface used when the
device sends the register, keepalive and alarm information to the E3G
server. It can be LAN port or dial interface.
Cautions
1.
For the using of E3G management interface, usually select LAN
port when using the IPSec tunnel, that is, let the E3G server
manage the device via the tunnel; when not using the IPSec
tunnel and the 3G interface can be accessed, you can select
Dial interface.
2.
For the using of the device report interface, the device
reports the information via the 3G dial interface as the
source interface; use LAN port as the report source
interface of the device so that the user can clearly
understand the IP segment used by the device. It is
convenient for the user to plan and manage the network.
WIFI Setting
WIFI of MP1800-10 router supports the 802.11b/g/n mode and
Open/WEP/WPA/WPA2 security mode. For the configuration, enter
Network
>
WiFi setting
and the configuration interface is as follows:
Netmask
: Set or modify the special IP address identifying
the network
address of the LAN IP, such as 255.255.255.0.
WiFi setting
