MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 24 of 95
Basic setting of mobile network
Network mode
: Set the mobile network access mode (2.5G/3G/auto
switchover);
APN
: Specifies the APN (Access Point Name) of the mobile carrier;
User name
: Set the user name used by dialing (you can get from the
network provider); the maximum length is 128 bits;
Password
: Set the password used by dialing (you can get from the
network provider); the maximum length is 128 bits.
Enable Back-up account
: Set using the standby account to dial. If
enabling the item and when the master account dialing fails, use the
standby account to dial.
Enable SIM Card Bind
: Set the binding function of the SIM card. If
enabling the option, bind the IMSI code of the SIM card with the system.
When using the 3G module for the first time, record the card number. If
using other card subsequently and enabling the option, there is error.
Enable Hardware ID Bind
: After enabling the function, carry the
hardware ID (hardware ID is MAC address of LAN port; the format of dial
user name is $MAC$user name) in the dial user name. LNS adopts the
hardware ID, user name, password, and IMSI to authenticate. The
function needs LNS and AAA server to cooperate.
For the common user, after completing the above basic parameter
configuration and saving, MP1800-10 router performs the wireless network
dialing connection automatically after powering on every time. It is
convenient to use.
