22
Kleiss MCS60-38 System Manual v.15 May 2020
|
www.MainlineControlSystems.com
Close the ball valve.
Release pressure from the dome by opening bleed
valve.
Remove the complete tapping tool from the ball
valve.
When doing this, make certain the valve doesn’t
inadvertently turn.
Disassemble the tapping tool.
Use hook assembly wrench [11005310] to remove
tapping device from drilling dome.
Use cutter wrench [10310835] to remove cutter
from drilling rod.
The cutter should contain the drilling coupon. Use
the necessary tools [Coupon Remover - 13200098]
to remove the coupon from the cutter.
After tapping steel pipe, to remove steel shavings
from interior of pipe, use the magnetic spindle in
combination with the drilling dome to clean the
interior of the pipe. To remove the majority of the
steel may take multiple insertions.
Clean and store tapping tool in its case.
